The Dakine Pickup Pad for Tailgate Protection. Are you the transport guy? Got a few extra bikes along for the ride and need a way to keep your truck from getting all scratched. Well DaKine has a great solution that not only protects your truck tailgate, but keeps the bikes in check to and from the trail. Features: Padded tailgate protection Individual frame anchor straps Three web cinch straps Access flap for tailgate handles Specs Large:62" width [ 158cm ] fits most full sized pick-ups Small:54" width [ 137cm ] fits most mid sized pick-ups * Oversized freight charge applies.
The Dakine Pickup Pad DLX builds on the heritage of the original Pickup Pad pioneered by Dakine. Updated DLX features accommodate new backup camera technology via the enlarged access flap and fit modern tailgate styling including wider spoilers. This padded tailgate protection allows for the quick and secure transport of up to 7 bikes on the large full size truck pad and 5 on the small mid-size truck pad. Two lockable grommets on either corner are for securing the pad to the truck for cable locks. The fleece-lined thick pad creates a barrier between your truck and bike so you can leave it on all season long for quick shuttle laps anytime. Features: Limited Lifetime Warranty Padded tailgate protection Large access flap for tailgate handles and rear-view cameras Works best on new tailgate designs Micro-fleece lining Individual bike anchor straps (7- Large; 5- Small) * Oversized freight applies on checkout.
- Rigid 6061-aluminum body with 9mm skewer
A fork hitch for bike transportation that allows for versitle mounting options on any flat surface. - Pre-aligned positioning for easier fork installation - Remove Boost 15 x 110mm insert to accommodate 20mm axles - Easy mounting to any flat surface - Rust-free Aluminum construction - The platform is 3.75 x 1.5" and the holes are 3" center to center Compatible with following: 15 x 110 mm (Boost, silver insert) 15 x 135 mm (Borealis, Fatback, 9zero7 + other Fat Bike forks) 15 x 142 mm (Salsa + others) 15 x 150 mm (Rock Shox Bluto Fork + others) 20 x 110 mm
Delta's pre-aligned positioning bike hitch allows for easy fork installation. It features special anti-rust treatment with a tough powder-coat finish. This ultra-rigid 9mm skewer allows you to easily carry your front wheel with a Delta Wheel Hitch or Wheel Holder (each sold separately). - Pre-aligned positioning for easier fork installation - Special anti-rust treatment with tough powder-coat finish - Features patented Delta locking lever - Base Dimensions 4" x 1.5" x 1.75" - Mounting Holes 3" center to center - Ultra-rigid 9mm skewer - Carry your front wheel with a Delta Wheel Hitch (sold separately)
$160.00 - $180.00
The EVOC TAILGATE PAD fixes your bikes safely and protects the tailboard of your pick-up truck from scratches when loading. Completely redesigned for 2018, the Tailgate Pad now features foam pads also on the back of the tailgate to better protect the bike's downtube. - Holds and covers up to 6 bikes to protect them as well as the tailgate from scratches and damages during bike transport - Padding is cut-resistant, water resistant and UV-stable - Non-slip protection (padded) - Quick-access tailgate release - Improved rear view camera compatibility - Fleece lining on truck side of the pad, won't damage paint - Size: full-size truck (XL) or mid-size truck (ML) - ML fits tailgates 130cm/50'' wide and XL fits tailgates 160cm/60'' wide
Hollywood Bike Valet Bicycle Rack. Make your home, business, or property really bike friendly with the Bike Valet. This sturdy parking stand holds up to 6 bikes and sports a tough indoor/outdoor textured finish. • 1-inch x 16 gauge steel side rails and horizontal tubes • ¾-inch x 16 gauge steel vertical tubes • Powder-coated finish • Double-sided configuration • Can be bolted down
Don't just pile your bikes into the back of your pickup! Use the space wisely and protect your rides with Hollywood's Truck Rack. Its rugged rail-and-clamp system makes installation easy and secure on mini, mid and full-size pickups, without drilling any holes. It comes with 2 heavy-duty mounts featuring 9mm-diameter skewers to hold 2 bikes. And additional mounts are available (sold separately), which enable a total capacity of up to 5 bikes.
Replacement lock cores Kuat Racks lock systems. Comes with lock cores, keys, and 1 core removal tool. This part is not made for Kuat's NV rack, Sherpa rack, or any other hitch mounted rack.
Need more room with your Kuat Vagabond X? Kuat's Xtender adds 21-inches to your basket, and comes with load bars for even more mounting options. Now you don't have to choose what gear makes the cut for your next outdoor adventure. Features • Comes with 2 load bars • Adds 21" to your Vagabond X (sold separately) • 160 lb total load capacity • Makes Vagabond X 41" x 73" x 7" • Load bars measure 44"
Always forgetting the thru-axle adapter for your roof rack? Kuat solved that problem for you: The TRIO can handle almost any bike you own. The unique mounting system fits quick release as well as 15mm and 20mm thru-axles. It will even play nice with fat bikes with the optional adapter kit (sold separately). The TRIO mounts to most factory and aftermarket crossbars and features an integrated cable lock. - 1 Bike Capacity (45 lbs max) - 3 Way Mount-Fits 9, 15, & 20 mm forks out of the box - Optional adapter kit for fat bikes (sold separately) - Mounts to most factory & all aftermarket cross bars - Integrated Cable Lock (locks both frame and rear wheel) - Sliding rear tire strap - Up to 4 feet between cross bars. - Max crossbar size-3.5” wide by 1.7” thick - Weight-7 lbs - Dims-56” x 4” x 1 3/8”
Love riding but also love post-ride tailgating? Now you can have both. The Pivot allows your bike rack (up to a loaded NV 2.0 4-Bike) to effortlessly swing away, providing ample clearance for tailgates, rear gates or just increasing your hatchback access. Features - 90-degree swing away - Provides clearance for a tailgate or rear doors - Locking, anti-rattle hitch pin Specs - 2" Hitch Only - Weight Limit: 250 lbs. / 114kg - Weight: 46 lbs.
Kuat's Transfer 2 offers all the Kuat quality you'd expect at a price that appeals to privateer racers and weekend riders alike. It fits both 1.25 and 2-inch trailer hitches and its stout steel construction won't leave you hanging, or your precious cargo bouncing around on the road. Bikes mount securely and easily with an adjustable locking arm and wheel tray. Best of all, there's no contact with the frame so your bike will come off the rack looking just as good as when you put it on. The wheel trays hold up to a four inch-wide tire and the rack holds bikes with wheels anywhere from 20 to 29 inches.
Kuat's Transfer 3 offers all the Kuat quality you would expect at a price that's sure to please privateer racers and weekend riders alike. Sturdy steel construction won't leave your precious cargo bouncing along the road, and it fits both 1.25 and 2-inch trailer hitch receivers. It holds three bikes and the wheel trays fit tires up to four inches wide. Bikes mount securely with an adjustable locking arm and a deep, stable wheel tray. And, there's no contact with your bike's frame so your bike will come off the rack looking just as good as when you put it on.
When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with intuitive release - Rear tire strap features co-molded strap to protect wheels - Premium gloss metallic powder with water transferred logos - Compatible with 2” NV 2.0 - Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each - Holds wheelbases up to 48” and tires as large as 4.8” - Quick change from 2 to 4 bikes
The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on. - Re-designed pivot with optional foot assist - Semi-integrated bike lock - Front tire ratchet design with an intuitive release - Rear tire cradle features a co-molded strap to protect wheels - Folding front cradle adds space between rack and vehicle - No-tool install with hand tight hitch cam system - Gloss metallic powder available in 3 colors - Low profile arced design delivers an amazing look - 2 Bike capacity up to 40 lbs. each - Holds wheelbases up to 47-inch and tires as large as 3-inch - Increased spacing between bikes to 14-inch - Lightweight platform rack design as low as 32lbs (assembled) - Available in both 2-inch & 1.25-inch hitch sizes
RockyMounts' Clutch SD is a tough fork-mount bolt-on bike rack. It interfaces perfectly with bed channels in trucks from Toyota, Nissan, Chevy, and GMC and couldn't be any more simple to use. The Clutch SD fits a 9mm fork axle, and the cast aluminum body has a center opening that easily accommodates a cable lock (sold separately).
Secure your through-axle-equipped bike to your fork mount bike rack (sold separately) with RockyMounts' DriveShaft. This adapter allows you to quickly and easily mount a bike with a 15mm or 20mm through-axle fork to your quick-release fork mount rack. It also comes with a lock for peace of mind.
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
$12.91 $19.99 35% Savings
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Saris' Traps Wheel Holder mounts easily to your Saris Single or Triple Track (each sold separately) to keep your front wheel secured. It accepts the wheel with little or no quick-release adjustment. Mounting hardware is included.
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
Easy to mount and a cinch to store in the back of your car, Saris’ Solo is a low-profile rack for peace-of-mind convenience. Solo’s uni-body frame has no adjustable parts, which makes it a no-brainer to set up. With its soft, rubber, pivoting feet and four hold-down straps, the Solo safely and securely attaches to your car. Two strong buckles and an integrated anti-sway strap keep your bike in place. As an added bonus, the Solo is built with 100% recyclable, non-rusting materials.
Hit the road today with Saris’ Sentinel 2-Bike rack—it’s ready to go right out of the box, easy to mount, and securely holds two bikes. The frame adjusts to the contours of your car and folds down flat for simple storage. To protect your car and provide a solid mount, the four hold-down straps have coated hooks, while the legs are foam-padded. Stiff ratcheting straps ensure a firm grasp on your bikes.
Page 1 of 7 Next page