Alpine - Alpine Touring -Telemark Bindings
The SUPER TELEMARK is a classic super-lightweight 3-pin telemark binding for use with 3-pin 75mm backcountry boots.
The G3 Ion 12 LT is designed for fast and light backcountry adventures. It has all the features of the Ion 12 without the extra weight from a brake system, instead uses a leash for minimalist retention. Features: Bindings include Ion LT leashes to keep your skis from getting away when they release Snow-clearing channel prevents snow buildup and icing for hassle-free step-in and transitions while avoiding prerelease Turn heel in either direction to lock for touring with either hand—there's no wrong way Simple Boot Stops help locate your boot toes at the correct place for quick, easy and consistent step-in without adding lots of weight Heel pieces are DIN adjustable from 5 - 12 for forward and twisting falls QuickFlick Heel Lifts are easy to operate with a ski pole Bindings adjust with a single tool: a Pozidrive #3 screwdriver Easy to install and use with any ski randonee boot tech fittings
The Marker Baron 13 EPF 110 Ski Binding is all about touring convenience. You can release the heel to go into walk mode, or you can release the heel and engage the Climbing Aid. The Climbing Aid blocks the heel from coming all the way down to flat; it stops you at your choice of 7° or 13°. This makes it easier to skin up an incline. The Baron 13 EPF also has Marker's Power Width Design. It distributes pressure over a wider area, and more effectively transfers power to your skis. With this binding you can zip up the mountain, and fly down it. Features: Brake width: 110mm DIN Range: 4-13 Heel release for touring Climbing Aid features stops the heel at either 7° or 13°, making uphill travel easier Triple Pivot Toe provides power transmission and reduces unwanted release Gliding AFD reduces the chances of getting your boot stuck when you need release Inter Pivot Heel increases power transmission to ski
Marker USA Jester 16 ID Binding has ruled the mountain. The new Jester 16 ID continues that dominance, from the highest peaks and steepest lines all the way to the park and pipe. With the addition of SOLE.ID, the Jester is even more versatile, with the ability to accommodate both Alpine and Alpine Touring ski boot norms. All Marker Royal Family bindings feature Power Width Design, our signature toe and heel designs that make your skis perform at their best – so you can rule with confidence. 7624Q1.JB(110mm)/7624Q1.JC(136mm) Boot Sole Compatability ISO 5355 (Alpine) & ISO 9523 (AT) DIN Range 6.0 – 16.0 Recom. Skier’s Weight 130+ lbs. Stand Height w/o Ski 22 mm Toe System Triple Pivot Elite Gliding AFD Stainless Steel, Height Adjustable Step-In Heel Inter Pivot Color Combinations Black Weight (Pair) 1990 g (90), 2000 g (110), 2010 g (136)
The Rottefella NTN Freedom Binding. A telemark binding system in a package designed specifically for backcountry skiing, the NTN Freedom is lighter in weight and offers a greater range of motion in free-pivot touring mode than its burlier cousin, the NTN Freeride binding. Features: Weight: 1500 g/pair Height: 25mm Point of rotation: 16mm from boot toe Walking angle: 60 degrees Heel lift 35mm and 65mm Ski brakes: 110mm included * SIZE INFORMATION * Small bindings come with soft-flexing green Power Tubes installed You can install green (soft), blue (medium) and red (stiff) cartridges (not included) for a desired flex Rottefella NTN Freedom telemark bindings include 110mm ski brakes that fit most powder skis Large bindings fit Garmont NTN boot sizes 26 mondo and up; fit Scarpa and Crispi NTN boot sizes 26.5 mondo and up Small bindings fit Garmont NTN boot sizes 25.5 mondo and down; fit Scarpa and Crispi NTN boot sizes 26 mondo and down
The 22 Designs Outlaw X is our updated NTN binding, now with easier step-in and out, lighter weight, and improved durability. Still built the 22 Designs way with sweet flex, copious spring travel, rugged steel construction, and blazing up and downhill performance. An underfoot spring steel plate allows a lively flex while offering precision lateral control. A single long spring provides smooth travel, and an easy preload adjustment makes it easy to find the sweet spot. Built in the USA with stainless steel, machined aluminum, and premium plastics, the Outlaw X is built to last, and the 6 hole mounting pattern will keep it solid on your ski. Easier to step in and out Improved durability for the hardest chargers Instant flex engagement 50 degrees of resistance-free touring Industrial strength main die spring Preload adjustable from 1 to 5 Spring-loaded climbing bail NTN compatible Toepiece height: 1.1” at rear with 3 degree ramp Large: 3 lbs, 8 oz / 1590g Brakes sold separately.
The 22 Designs Axl Telemark binding sports a bombproof 6-hole mounting pattern, long-lasting chrome die springs, and a front assembly built of tough stainless steel. It gives you adjustable, exceptional power, but tours effortlessly. Features: The first free-pivot binding with three cable guide positions. Optimize your bindings for your skiing style and snow conditions. Super durable: 2000 lb test cable attachments won't break, toe piece forces transmitted steel-to-steel. Over 2" of spring travel for smooth action and durability. The spring-loaded HammerHeel is the easiest to use climber available; Flip it up or down with your ski pole. Climbing bails available in 3 sizes, standard bail included. Cables routed underfoot for maximum control; plastic boots flex at the bellows instead of tip-toeing. Ultra-secure mounting pattern. Riser height: 1.1" or 28mm at the rear, with a 2 degree ramp. Pivot location: directly under pin-line. Weight: 3.9 lbs per large pair, 3.8 lbs for small. Size Small for Mondo 25.5 and under, Large for 26 and up. 2 Year Warranty. Made in the USA.
Incorporating features of the Bombproof Axl, but designed as a resort skiing binding, the Vice provides three pivot positions to dial in to your skiing. An improved active design of the HammerHead to come up with the best-skiing binding on the market. Features: Super durable: 2000 lb test cable attachments won't break, one-piece stainless steel toepiece. Over 2" of spring travel for smooth action and durability. Cables routed underfoot for maximum control; plastic boots flex at the bellows instead of tip-toeing. Ultra-secure mounting pattern. Riser height: 1.0" or 25mm at rear, with a 2 degree ramp. Weight: 3.15 lbs per large pair, 3.0 lbs for small. Size Small for Mondo 25.5 and under, Large for 26 and up. 2 Year Warranty. Made in the USA.
The Marker USA Kingpin 13 Binding redefines the performance standard in PinTech AT binding technology. Marker’s PinTech binding with DIN/ISO 13992:2007 certification from Germany’s prestigious TÜV testing organization, the Kingpin’s unique design and new toe and heel pieces are the culmination of years of R&D testing including over one million vertical feet on snow. Ease of use, DIN/ISO certified release function, and best of all, unbeatable power transmission while on the descent mean that you’ve never had a day in the backcountry like the ones you’ll have on the Kingpin. (100-125mm) Boot Sole Compatability ISO 9523 (AT) w/Tech Inserts DIN Range-6.0 – 13.0 Recom. Skier’s Weight-130+ lbs. Stand Height w/o Ski-21 mm Toe System-Kingpin Pintech Toe Step-In Heel-Kingpin Heel Color Combinations-Black – Gold Weight W/O / with brake 1300 g / 1460 g
The Dynafit Radical ST 2.0 is the evolution of the Radical ST. It offers simple operation and increased safety due to the rotating toe piece, at last making the frame-less system accessible to every ski tourer. The Radical ST 2.0 means that no valid argument remains for a frame system.
$499.99 - $529.95
Fritschi Diamir Freeride Pro Binding. Taking freeride performance to the backcountry has never been easier. With an XL brake that is optimized for fat skis up to 120 mm in the waist, the Fritschi-Swiss Diamir Freeride Pro combines the wide-bodied power transmission of an alpine binding with Fritschi's new Gliding Technology for a smooth, natural stride. On the skin track, Gliding Technology eases your ascent by eliminating that hinge-like, tiptoe feeling. The Freeride Pro's wide footprint and toepiece hinge provide a larger footprint than previous Fritschi bindings, giving you improved power to drive powerful, wide-bodied skis. Performance, meet efficiency. Features: Gliding Technology with a wide toe piece hinge Power Transmission Control (PTC) technology Max DIN 12, and DIN certified for both AT and alpine boot soles Four-level heel elevator Free-gliding heel bar with integrated lock prevents accidental release into tour mode.
The Dynafit ST Rotation 10 Ski Touring Binding is the evolution of the Radical ST 2.0 Binding. It offers the largest possible entry comfort with its new, integrated centering system. The pivoting toe piece avoids unintended releases, guaranteeing you TÜV-certified safety. This pin binding offers 22.5mm of flex in the length adjustment in both directions and can be set for a release value ranging from 4-10. A forward pressure of 10mm ensures that the release value remains constant even upon deflection of the skis. ADJUSTABLE LENGTH-22.5 - 22.5 mm +/- WEIGHT-599 g DIN-4-10 LOCK TYPE-Manual GENDER-Unisex PRODUCTID-08-0000049102 Chromoly, Forged Aluminium, High Tech Syntetic, Stainless steel
The Dynafit TLT Speed Radical Binding. This comfortable evolution of the legendary TLT Speed combines maximum comfort and light weight. Features: ADJUSTABLE LENGTH-12.5 - 12.5 mm +/- WEIGHT-370 g DIN-4-10 LOCK TYPE-Manual GENDER-Unisex 08-0000048725 Chromoly, Forged Aluminium, High Tech Syntetic, Stainless steel
The new Marker USA Griffon 13 ID Alpine Touring Binding extends its performance range with SOLE.ID, allowing both Alpine and Alpine Touring boot compatibility to create the most versatile freeride binding on the market today. Along with the Griffon, all of Marker’s Royal Family bindings feature Power Width Design, our signature toe and heel designs engineered to make today’s wider skis perform at their very best – so you can Rule the Mountain. Features: Boot Sole Compatability ISO 5355 (Alpine) & ISO 9523 (AT) DIN Range-4.0 – 13.0 Recom. Skier’s Weight 80+ lbs. Stand Height w/o Ski-22 mm Toe System-Triple Pivot Elite Gliding AFD-Stainless Steel, Height Adjustable Step-In Heel-Inter Pivot Color Combinations-Black (C1) White (C2) Weight (Pair)-1890 g (90), 1900 g (110), 1910 g (120)
Page 1 of 1